以上で終了！です(￣∇￣)
それでは・・・再起動してみます。

sub2# shutdown -r now

おめでとうございます(^o^)丿
　無事にbootできました(*^^)v
　起動が　早くなった事　体感できました。


確認してみます。

sub2# uname -a
FreeBSD sub2.yumidon 4.8-RELEASE FreeBSD 4.8-RELEASE #0: Thu Oct 23 00:31:05 JST 2003 root@sub2.
yumidon:/usr/src/sys/compile/MYKERNEL310 i386




sub2# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Oct 23 00:31:05 JST 2003
root@sub2.yumidon:/usr/src/sys/compile/MYKERNEL310
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 807957219 Hz
CPU: Intel Celeron (807.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
>
real memory = 535736320 (523180K bytes)
avail memory = 518090752 (505948K bytes)
Preloaded elf kernel "kernel" at 0xc0384000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f0ed0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq
11 at device 2.0 on pci0
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <unknown card> (vendor=0x13f6, dev=0x0111) at 9.0 irq 9
rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xf6800000-0xf68000ff irq 9 at device 10.0 o
n pci1
rl0: Ethernet address: 00:90:fe:23:51:4b
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci1: <unknown card> (vendor=0x1000, dev=0x000f) at 12.0 irq 9
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xb800-0xb80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at 31.2 irq 5
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 10
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> at 31.4 irq 9
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 28629MB <Maxtor 33073U4> [58168/16/63] at ata0-master UDMA66
acd0: CD-RW <CD-W54E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 5 at device 31.2 on pc
i0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pc
i0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
link_elf: symbol splash_register undefined


　　　　　　　　　　　　　　　　　　　　　　　　　　　　　お疲れさまでした（￣ー￣）