cpan> install File::Tail
Running install for module File::Tail
Running make for M/MG/MGRABNAR/File-Tail-0.98.tar.gz
Fetching with LWP:
ftp://ftp.jaist.ac.jp/pub/lang/perl/CPAN/authors/id/M/MG/MGRABNAR/File-Tail-0.98.tar.gz
Fetching with LWP:
ftp://ftp.jaist.ac.jp/pub/lang/perl/CPAN/authors/id/M/MG/MGRABNAR/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/M/MG/MGRABNAR/File-Tail-0.98.tar.gz ok
File-Tail-0.98/
File-Tail-0.98/t/
File-Tail-0.98/t/10open.t
File-Tail-0.98/t/20tail.t
File-Tail-0.98/README
File-Tail-0.98/Makefile.PL
File-Tail-0.98/Changes
File-Tail-0.98/Tail.pm
File-Tail-0.98/select_demo
File-Tail-0.98/MANIFEST
File-Tail-0.98/test.pl
File-Tail-0.98/Tail.pm.debug
File-Tail-0.98/logwatch

CPAN.pm: Going to build M/MG/MGRABNAR/File-Tail-0.98.tar.gz


File::Tail will be installed without debugging information.
This information isn't usefull unless you intend to tinker
with the code. To install with debugging enabled, use:
perl Makefile.PL LOGIT
Checking if your kit is complete...
Looks good
Warning: prerequisite Time::HiRes 1.12 not found.
Writing Makefile for File::Tail
---- Unsatisfied dependencies detected during [M/MG/MGRABNAR/File-Tail-0.98.tar.gz] -----
Time::HiRes
Shall I follow them and prepend them to the queue
of modules we are processing right now? [yes]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module Time::HiRes
Running make for J/JH/JHI/Time-HiRes-1.50.tar.gz
Fetching with LWP:
ftp://ftp.jaist.ac.jp/pub/lang/perl/CPAN/authors/id/J/JH/JHI/Time-HiRes-1.50.tar.gz
Fetching with LWP:
ftp://ftp.jaist.ac.jp/pub/lang/perl/CPAN/authors/id/J/JH/JHI/CHECKSUMS
Checksum for /root/.cpan/sources/authors/id/J/JH/JHI/Time-HiRes-1.50.tar.gz ok
Time-HiRes-1.50/
Time-HiRes-1.50/HiRes.xs
Time-HiRes-1.50/hints/
Time-HiRes-1.50/hints/sco.pl
Time-HiRes-1.50/hints/dynixptx.pl
Time-HiRes-1.50/hints/dec_osf.pl
Time-HiRes-1.50/hints/irix.pl
Time-HiRes-1.50/t/
Time-HiRes-1.50/t/HiRes.t
Time-HiRes-1.50/Changes
Time-HiRes-1.50/MANIFEST
Time-HiRes-1.50/fallback/
Time-HiRes-1.50/fallback/const-xs.inc
Time-HiRes-1.50/fallback/const-c.inc
Time-HiRes-1.50/typemap
Time-HiRes-1.50/TODO
Time-HiRes-1.50/HiRes.pm
Time-HiRes-1.50/README
Time-HiRes-1.50/Makefile.PL

CPAN.pm: Going to build J/JH/JHI/Time-HiRes-1.50.tar.gz

Configuring Time::HiRes...
Looking for gettimeofday()... found.
Looking for setitimer()... found.
Looking for getitimer()... found.
You have interval timers (both setitimer and setitimer).
Looking for ualarm()... found.
Looking for usleep()... found.
Looking for nanosleep()... found.
You can mix subsecond sleeps with signals.
Checking if your kit is complete...
Looks good
Writing Makefile for Time::HiRes
Now you may issue 'make'. Do not forget also 'make test'.

cp HiRes.pm blib/lib/Time/HiRes.pm
/usr/bin/perl /usr/lib/perl5/5.8.0/ExtUtils/xsubpp -typemap /usr/lib/perl5/5.8.0/ExtUtils/typemap -
typemap typemap HiRes.xs > HiRes.xsc && mv HiRes.xsc HiRes.c
gcc -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/loca
l/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O2 -march=i386 -mcpu=i686
-g -DVERSION=\"1.50\" -DXS_VERSION=\"1.50\" -fPIC "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/
CORE" -DTIME_HIRES_NANOSLEEP -DATLEASTFIVEOHOHFIVE HiRes.c
Running Mkbootstrap for Time::HiRes ()
chmod 644 HiRes.bs
rm -f blib/arch/auto/Time/HiRes/HiRes.so
LD_RUN_PATH="" gcc -shared -L/usr/local/lib HiRes.o -o blib/arch/auto/Time/HiRes/HiRes.so
chmod 755 blib/arch/auto/Time/HiRes/HiRes.so
cp HiRes.bs blib/arch/auto/Time/HiRes/HiRes.bs
chmod 644 blib/arch/auto/Time/HiRes/HiRes.bs
Manifying blib/man3/Time::HiRes.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/ar
ch')" t/*.t
t/HiRes....ok
All tests successful.
Files=1, Tests=25, 9 wallclock secs ( 2.12 cusr + 0.05 csys = 2.17 CPU)
/usr/bin/make test -- OK
Running make install
Installing /usr/lib/perl5/5.8.0/i386-linux-thread-multi/auto/Time/HiRes/HiRes.so
Installing /usr/lib/perl5/5.8.0/i386-linux-thread-multi/auto/Time/HiRes/HiRes.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/lib/perl5/5.8.0/i386-linux-thread-multi/Time/HiRes.pm
Installing /usr/share/man/man3/Time::HiRes.3pm
Writing /usr/lib/perl5/5.8.0/i386-linux-thread-multi/auto/Time/HiRes/.packlist
Appending installation info to /usr/lib/perl5/5.8.0/i386-linux-thread-multi/perllocal.pod
/usr/bin/make install -- OK
Running make for M/MG/MGRABNAR/File-Tail-0.98.tar.gz
Is already unwrapped into directory /root/.cpan/build/File-Tail-0.98

CPAN.pm: Going to build M/MG/MGRABNAR/File-Tail-0.98.tar.gz

cp Tail.pm blib/lib/File/Tail.pm
AutoSplitting blib/lib/File/Tail.pm (blib/lib/auto/File/Tail)
Manifying blib/man3/File::Tail.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/ar
ch')" t/*.t
t/10open....ok
t/20tail....ok
All tests successful.
Files=2, Tests=13, 36 wallclock secs ( 2.12 cusr + 0.23 csys = 2.35 CPU)
PERL_DL_NONLAZY=1 /usr/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
/usr/bin/make test -- OK
Running make install
Installing /usr/lib/perl5/site_perl/5.8.0/auto/File/Tail/autosplit.ix
Installing /usr/lib/perl5/site_perl/5.8.0/File/Tail.pm
Installing /usr/share/man/man3/File::Tail.3pm
Writing /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/File/Tail/.packlist
Appending installation info to /usr/lib/perl5/5.8.0/i386-linux-thread-multi/perllocal.pod
/usr/bin/make install -- OK

cpan> install Time::HiRes
Time::HiRes is up to date.

cpan> exit
Lockfile removed.